PC sunshine plate | endurance plate | | PC sunshine board PC endurance plate | PC dedicated noise barrier board product features

(1) the sun plate endurance plate transmission of light: P C plate light transmittance as high as 89%, equivalent to that of glass Bi beauty. UV coating plate blasting bask in the sun won't produce yellowing, atomization, pervious to light, the transmission loss is only 6%, after ten years of PVC turnover rate is as high as 15%, 20%, glass fiber was 12% - 20%.

(2) the sun plate endurance plate impact resistant, impact strength is common glass of 250-300 times, 30 times that of the same thickness of acrylic, 2-20 times that of toughened glass, the following two meters with 3 kg hammer drop no crack, there are "no broken glass" and the "ring of steel" laudatory name.

(3) the sun plate endurance plate light weight: weight is only half of the glass, save transportation, unloading, installation and support of the framework cost.

(4) the sun plate endurance plate flame retardant: national standard GB50222-95 confirmed that the PC board is difficult level, namely the B1 level. Ignition point is 580 degrees Celsius, PC board itself from the self-extinguishing fire, burning will not produce poisonous gas, don't feed the fire from spreading.

(5) the sun plate endurance plate UV protection: PC board side coated resistance to ultraviolet (UV) coating, on the other side has the condensation process, anti-ultraviolet radiation, heat insulation did prevention functions in one. Can block ultraviolet light through, and is suitable for protecting valuable works of art and exhibits, make it from UV damage, prevent ultraviolet (UV) protective film solar radiation has clear the harm to the polymer materials, can produce fine lines caused by the surface degradation. These fine lines are susceptible to water, dust and water chemical and erosion. These on the influence degree of the polymer is largely dependent on environmental parameters such as geographical location, altitude and seasonal change, etc. Ino plank have one-sided or two-sided uv protective layer, good outdoor corrosion resistance performance. This unique protection to ensure long-term under the intense ultraviolet light irradiation, still can use for a long time and keep its optical properties, compared with other thermal plastic material.

Endurance plate (6) the sun can be bending, can be in accordance with the design adopts cold bending method, at the site installation arched, semicircular roof and Windows. Minimum bending radius of the plate thickness of 175 times, hot bending.

(7) the sun plate endurance plate sound insulation sex: PC board sound insulation effect is obvious, than an equivalent thickness of the glass and the strength plate has better sound, sound insulation, the thickness under the same conditions, the PC board of sound volume 3-4 db higher than that of glass. In the world is the first selection of highway noise barrier material.

(8) the sun plate endurance plate energy-saving sex: Xia Tianbao cool, heat preservation in winter, PC board has more than common glass, and other plastic thermal conductivity (K value), the heat insulation effect between 7% and 25% higher than the same glass and PC board insulation up to 49%. So that the heat loss is greatly reduced, used to have a warm equipment construction, environmental protection material.

(9) the sun plate endurance plate temperature adaptability: PC board in - no cold short, 100 degrees Celsius to 135 degrees Celsius without softening, its mechanics in the harsh environment, mechanical properties, etc. No obvious change.

(10) sun plate endurance plate weatherability, PC board can be - 40 ℃ to 120 ℃ scope to keep the stability of the physical indicators. Artificial climate ageing test 4000 hours, yellowing degree is 2, light transmittance reduce the value of only 0.6%.

(11) the sun plate endurance plate prevent dewing: outdoor temperature 0 ℃, indoor temperature is 23 ℃, the indoor relative humidity under 80% when, the inner surface of the material not condensation.